DSL-G604T MAC Filtering
DLINK
DSL-G604T
Wireless ADSL/ADSL2/2+ Modem Router
To add MAC addresses (Physical address) to Wireless router access control list please follow the following
Find MAC address on the Host computer (A computer that ready to connect to the internet)
- Click “Start” and “Run”
- Type “cmd” and press “ENTER”
- Wait for command windows prompt up then type “ipconfig /all” and press “ENTER” like the following
This is MAC Address of the wireless adapter
To get to the Wireless Router configuration page please follow the following
- Go to the computer that already on the network and go to the “Internet Explorer” or any web browser software
- Type in the URL address bar http://10.1.1.1 and press “Enter” like the following screen
- Authentication windows pop up and type the following details
Username= admin
Password=admin
- The wireless router menu shows up
- Click on “Advanced” tab
- Click on “wireless management” button on the left hand side bar which located second one from the bottom and you should see the following screen
Click Add and Apply Type in MAC address that recorded earlier from the above eg. 00-0e-35-c0-37-57
To Save the Settings that you made change please follow the following
- Click on “Tools” tab the following screen appears
Click “Save and Reboot”
The wireless router will now restart to take an effect of the changes we made. During the wireless router restart, you will lose all your network and internet connection. Wait for approximately 1 or 2 mins to let the wireless start up and the wireless network connection should now be back online as normal state.
Comments